Bleakley Impressor 1990 Saleen #0193

The idea of driving this car is getting more and more exciting.  At this point I've driven the car less than 150'.  That was far enough to get it off the trailer and up into the garage. Since January this thing has sat on jack stands while being worked on.  I think...

These drip rail moldings were a bit disappointing when they arrived a few years ago. I bought them 3 years ago when I was trying to complete Almost 4. I don't remember where I bought them or what brand they were.  When they arrived I threw them on the shelf and...

Please subscribe to the YouTube channel if you have not already.  Also, find us on Facebook and Instagram as Purist Motorsports.  Don't forget to like and share our content. We had a battle with the exhaust.  So it took two installments on the video side to get this...

Please subscribe to the YouTube channel if you have not already.  Also, find us on Facebook and Instagram as Purist Motorsports. One of the options for a Bleakley Ford Impressor Mustang was a "Stainless Off Road Exhaust".  This car had an H pipe on it with cats.  Once...

If you haven't yet, head over to YouTube and subscribe to our YouTube channel here While working on the video for the suspension we talked about the air dam not being attached properly.  It's a simple zip tie affair with the 89-93 rear air dam on the Foxbody...

This Bleakley Ford Saleen Mustang has some really good parts on it that a previous owner installed.  The shocks and struts are from Maximum Motorsports and are their brand of shocks set up for coil overs on all four corners.  The front suspension has coil overs and...

Join us on YouTube as we document this process in video as well as the blogs here.  Our first video here is a walk around the car and discussion of what isn't correct on this vehicle. There are many good parts on it but they aren't Saleen factory correct. There are...

Simple post.  Old Smoked Taillights are gone.  They were actually done really well.  They were factory tail lights (headlights too) that were painted smoke and from the looks of what was done, it was done with care.  These were sold to a fellow enthusiast While I dig...

The Bleakley Impressor package used a host of Ford Motorsport parts and JBA parts. JBA offered worked over stock heads and headers with a cam among other things at the time.  So the Impressor package had a lot of Ford Motorsport, JBA, and Saleen parts.   So far there...

My how 10 years have changed when it comes to finding parts.  Ten years ago when I bought Almost 4 finding Foxbody Saleen parts wasn't as challenging as it is today.  Many of the parts needed for this 1990 Saleen were fairly common 10 years ago.  When I owned my 1989...

I know what you're thinking.  You swapped out an aluminum radiator for another aluminum radiator?  Yes. I sure did.  There are several parts on this car that are modern parts.  The radiator is one of them along with the stereo and the suspension. We'll save the stereo...

This is nuts.  How else can I say it? I had different plans for this car. After getting the SA10 replica/clone of Almost Four 95% complete, I wanted to grab a red Foxbody Saleen to modify with some Saleen "spec" parts and enjoy as a "low stress" driver. This would...